How Much Is The Size Of The Opening Of The China Stainless Stee

  • Kitchen decoration is relatively important. When decorating, we must pay more attention to the details. Just take the cabinet sink opening. Many people don’t know how suitable the size of the China Stainless Steel Sink opening is. Although these are minor problems, It is really critical during use.

    Speaking of the problem of opening the cabinet sink, I believe that many of my friends first thought of the size of the opening of the cabinet sink. In fact, it is true. However, some friends were not so thoughtful in the renovation, so that the cabinets have been installed, and the sink has not yet been settled. In response to this situation, the general installation masters in order to solve the problem at one time, do not want to return to the game, are to open according to the regular size.

    In fact, the so-called conventional opening size, that is, according to the size of the relatively large sink, is generally 72X37 cm. Of course, before deciding to do so, the master will judge the opening according to the length of the table, and whether it will affect the installation of the sink of this size.

    What should I pay attention to when opening the cabinet sink?

    1. Confirm the size of the sink and its hole (the arc of the four corners of the water hole);
    2. According to the drawings, determine the center position of the sink, use the template to locate or draw the opening line according to the hole size;
    3. First open the round hole with the hole opener at the four corners of the hole position, and then use the twisting machine to open the hole along the opening line;
    4. Mill the edge of the hole according to the drawing and cut out the corresponding edge shape;
    5. Evenly put the glass glue on the bottom edge of the sink hole, place the water tank on the hole of the opened sink, stick the reinforcement block, and strengthen it with strong AB glue. After the glue is solidified, apply the sealant.
    6. When milling the hole shape of the sink and installing the sink, it is necessary to distinguish the front and back sides of the countertop;
    7. If the sink is used as a countertop, the countertop does not need to be treated during the processing of the factory;
    8. If the above-ground basin is installed on site, draw the opening line according to the opening template of the water tank, first open the round hole with the hole opener at the four corners of the hole position, and then open the hole along the opening line with the twisting machine;
    9. Evenly put the glass glue on the edge of the water tank, install it in the hole of the opened sink, clean the excess glass glue, and then cure the glue.